Orbegozo RMW 2000 Manual De Instrucciones página 14

RMW 2000, RMW 2010
 There is tip over switch on the base. When the heater
tips over,
automatically.
LEGS ASSEMBLY
 Place the wheels in the brackets and snap them into place.
 Place the supports with the wheels at the ends of the lower
part of the appliance and screw them on.
INSTRUCTIONS FOR USE AND OPERATION OF THE REMOTE CONTROL
 Connect the appliance to the power outlet.
 Put the switch in position I
 Press the On/Off button
 Press the Heat Setting button to set the desired power:
- Position 1: Minimum power, 1000W
- Position 2: Maximum power 2000W
 Set the temperature. Press the Temp Setting button to increase the temperature by
1°C each time:
- Position 1 (1000W): You can select from 18 to 24ºC
- Position 2 (2000W): You can select from 25 to 30ºC
 Set timer. Each time you press the Timer button, the timer will increase by 0.5 hours
up to a maximum of 12 hours.
the electricity will be turned off
14