JVC GR-AX727 Manual De Instrucciones página 8

All manuals and user guides at all-guides.com
8
CHG. (charge) indicator
Marks
POWER
indicator
END
indicator
REFRESH switch REFRESH indicator
Hook on.
Push in.
BATT. RELEASE
**REFRESH
The AC power adapter features a REFRESH
function that allows you to fully discharge the
battery pack before recharging.
To discharge the battery . . .
.... attach the battery pack to the adapter as
shown in the illustration to the left. Then
push REFRESH. The REFRESH indicator
lights when discharging starts, and goes
out when discharging is complete.
Power
This camcorder's 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
No function is available without power supply.
Use only specified power supply.
Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1
Connect the charger's AC power cord to a wall
outlet. The power indicator lights.
To AC outlet
ATTACH BATTERY PACK
2
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
3
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
BATT. PACK
BN-V12U
BN-V22U
BN-V25U
USING THE BATTERY PACK
ATTACH BATTERY PACK
1
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
2
Slide BATT. RELEASE and pull out the battery pack.
RECORDING TIME
BATT. PACK GR-AX627/AX527
approx. 1 hr. 5 min.
BN-V12U
(35 min.)
approx. 2 hrs. 15 min.
BN-V22U
(1hr. 25 min.)
approx. 3 hrs.
BN-V25U
(1hr. 50 min.)
( ): when the video light is on (GR-AX827/AX627 only).
GETTING STARTED
CHARGE DISCHARGE
approx.
approx. 1 hr. 10 min.
3 hrs. 30 min.
approx. 2 hrs. 10 min. approx. 7 hrs.
approx. 2 hrs. 40 min. approx. 10 hrs.
GR-AX827/AX727
approx. 1 hr.
(35 min.)
approx. 2 hrs. 10 min.
(1 hr. 20 min.)
approx. 2 hrs. 50 min.
(1 hr. 50 min.)