LG WT7900HBA Manual Del Propietário página 30

30 OPERATION
Special Care Features
Press the Special Care button to select specialized
cycles or add features to standard cycles. Press
the button repeatedly to move through the available
features.
NOTE
• To protect your garments, not every feature is
available with every cycle.
• If the Start/Pause button is not pressed within 60
minutes to start the cycle, the washer will shut off
and all settings will be lost.
Soak
This option provides a 30-minute presoak prior to
the start of the selected cycle. Use the Soak option
to presoak garments to help remove difficult spots or
stains on fabrics. At the end of the presoak time, the
selected cycle will begin with the same water used for
the soak.
NOTE
• You cannot select the Soak option for the Tub Clean
cycle.
Stain Care
Use this option for heavily soiled loads that need
improved stain treatment. When Stain Care is
selected, the wash cycle will begin with warm water
to help prevent the setting of certain types of stains.
Then, as the cycle progresses, hot water will be
added to gradually increase the water temperature to
help remove stains that require treatment at higher
temperatures.
NOTE
• Best results are obtained with smaller loads (less
than 6 lb.)
• If you select Stain Care, the Cold Wash option is not
available.
Rinse+Spin
Select this option to rinse and spin a load separately
from a regular cycle. This can be helpful in preventing
fresh stains from setting in fabrics. You can change
the spin speed by pressing the Spin button.
1
Press the Power button to turn on the washer.
2
Press the Special Care button repeatedly until
Rinse+Spin is selected.
3
Press the Start/Pause button.
Special Drain Feature
This washer is equipped with a special drain feature
that is designed to make your washer as safe as
possible. If the washer is paused or shut off while
there is still water in the tub, the water will drain
automatically after several minutes of inactivity. This
helps keep children safe by reducing the possibility of
water remaining in the tub.
Any water remaining in the tub will automatically drain
4 minutes after the washer has shut off. If the washer
is paused and the Start/Pause button is not pressed
within 60 minutes, the washer will shut off and all
cycle settings will be lost. And any water remaining in
the tub will be drained.
The washer can be turned on or restarted any time
before the drain begins. However, once the washer
begins to drain, all controls and functions will be
disabled until the water has been completely drained
and the washer shuts off.
Add Garments
If you've forgotten to add an item or need to remove
foreign objects like coins or keys after the cycle
has started, the best time to do so is while the Add
Garments indicator is on. Once the indicator turns off,
adding garments may affect the cycle time or wash
performance.
1
Press Start/Pause. The cycle pauses and the
lid (door) unlocks.
2
Open the lid (door), add garments or remove
foreign objects, and close the lid (door).
3
Press the Start/Pause button to start the cycle.
The cycle continues automatically.