Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS
PRODUCT SAFETY & LEGAL DISCLAIMER
IMPORTANT READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO
•
MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
Review the product package and contents prior to beginning the installation. Take care when
•
opening the packaging and removing items. If a return is needed you will want to return the product in
its original packaging if possible.
This instruction guide is provided as a GENERAL installation guide, some vehicles vary dimensionally
•
and may require additional steps.
Test fit the product on the vehicle prior to any third party modifications and or finishing. The
•
manufacturer and/or distributors do not accept responsibility for third party charges, labor and or
third part replacement modifications. Some modifications may void the factory warranty.
•
Exercise due-diligence when installing this product. The manufacturer and distributors of this product
do not accept any responsibility for vehicle damage or personal injury resulting from the installation of
this product. Careless installation and operation can result in serious injury or equipment damage.
•
This product is for general off-road use. All liability for installation and use rests with the
owner/operator.
INSTALLER: Once installation is complete, please return this guide along with other documentation
•
included in this product back to the consumer for future reference. The manufacturer/distributors of
this product do not guarantee this particular version will be available at a later date.
REV.01
© 2016 Go Rhino Products. All rights reserved
www.gorhino.com
589 W. Apollo St., Brea, CA 92821
PART NO.
• D64029TK
PRODUCT DESCRIPTION:
• BRACKET DOMINATOR SIDE
STEPS
APPLICATION:
• FORD BRONCO SPORT
• FORD MAVERICK
P: 888 427 4466
1
Publicidad
Manuales relacionados para Go Rhino D64029TK
Resumen de contenidos para Go Rhino D64029TK
- Página 1 The manufacturer/distributors of this product do not guarantee this particular version will be available at a later date. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 2 Installation of some of these products may alter the factory sensor system performance. • Factory sensors may read shackles or hooks protruding from the fairlead and or tow hooks. • All sensor testing is completed by Go Rhino Products and or third party testing labs on modified • vehicles. •...
- Página 3 Drilled plate ½” Screw with plate 1 set Dominator Side Step (Not Shown) Go Rhino recommends you, the installer, read this installation instruction manual from front to back before installing the product. TOOLS NEEDED FOR INSTALLATION: • Ratchet • Cutter •...
- Página 4 STEP # 2 • Temporarily uninstall the fabric lower cover by removing the plastic clip using a flat screw driver. this will allow you to access the inner hole on the chassis. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 5 • Present the bracket on position. This will allow you to mark an area on the fabric inner cover that needs to be cut. Once cut, install the bracket using one Hex Nut and one flat washer. Do not tight the assemble yet. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 6 • Locate the front hole in the chassis. Using the wire guide as shown, introduce the screw with plate and the drilled plate on the hole then, carefully, pull the wire guide until the inner assemble is in position. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 7 Install the bracket using one Hex Nut and one flat washer. Do not tight the assemble yet. STEP # 8 • Align the faces of the Front and Rear brackets so they are parallel to each other. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 8 • Attach one of the Dominator side step to each bracket using the Nut-Plate, (2) 3/8” x 1 ¼”hex bolts, (2) 3/8” lock washers and (2) 3/8” flat washers, Now you can tight the assembly. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 9 This warranty covers the cost of the product only and does not include the cost of removal, installation, third party modifications or shipping of the product. In no event shall Go Rhino be liable to buyer or any third party for any damage or harm caused by the product or use thereof, regardless of weather such damages were foreseeable and whether or not Go Rhino has been advised of the possibility of such damages, not withstanding the failure of any agreed or other remedy of its essential purpose.
- Página 10 Los fabricantes / distribuidores de este producto no garantizan que esta versión en particular estará disponible en una fecha posterior. © 2016 Go Rhino Products. All rights reserved www.gorhino.com 589 W. Apollo St., Brea, CA 92821 P: 888 427 4466 REV.01...
- Página 11 Los sensores de fábrica pueden leer los ganchos que sobresalen del producto. • Todas las prueba de sensores se hace por Go Rhino Products y o por un laboratorio externo. • • La sensibilidad del sensor, las conexiones de los sensores, las condiciones de funcionamiento son todas las variables que influyen en la funcionalidad de los sensores.
- Página 12 Placa barrenada Tornillo con solera ½” 1 set Dominator Side Step (No se muestra) Go Rhino te recomienda leer y comprender todas las instrucciones antes de instalar. HERRAMIENTAS NECESARIAS: • Matraca • Navaja de corte • Extension de matraca • Desarmador plano •...
- Página 13 PASO # 2 • Desinstale temporalmente la cubierta inferior de tela quitando el clip de plástico con un destornillador plano. esto le permitirá acceder al orificio interior del chasis. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 14 • Presente el soporte en posición. Esto le permitirá marcar un área en la cubierta interior de tela que necesita ser cortada. Una vez cortado, instale el soporte con una tuerca hexagonal y una arandela plana. No apriete las piezas todavía. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 15 REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 16 Instale el soporte usando una tuerca hexagonal y una arandela plana. No apriete el conjunto todavía. PASO # 8 • Alinee las caras de los soportes delantero y trasero para que queden paralelos entre sí. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 17 • Fije el estribo Dominator a cada soporte usando (2) tornillos hexagonales de 3/8 ”x 1 ¼”, (2) rondanas de seguridad de 3/8 ”y (2) 3/8” rondanas planas. Alinee el estribo y apriete toda la tornillería. REV.01 © 2016 Go Rhino Products. All rights reserved...
- Página 18 En ningún caso Go Rhino será responsable ante el comprador o terceros por cualquier daño o perjuicio causado por el producto o el uso de los mismos, sin importar el tiempo en tales daños fueron previsibles y si Go Rhino ha sido advertido de la posibilidad de tales daños , no obstante el fracaso de cualquier remedio convenido u otro de su propósito esencial.