Orbegozo HO 181 IA Manual De Instrucciones página 10

HO 181 IA
Before being used for cooking, the appliance should be switched on "empty" to eliminate the "smell of new"
and any oils remaining from the production process. Insert the plug in the power socket, turn
thermostat to "max", turn the timer knob to position "20", position the selector knob
appliance on. When the cycle ends, remove the plug from the socket and wait until the appliance is cool before
removing the accessories. These must be washed in hot water with normal dishwashing liquid, rinsed and dried
before being returned to their position.
USING THE OVEN
Generally speaking it is not necessary to preheat the oven, but for some foods (meat, pastries) it is advisable to
preheat the oven as described above, making sure the door is closed properly.
Put the shelf grids or/and enamel baking tray at the desired height in the slots in the oven.
* Place the enamel tray at the bottom of the oven.
* Put the food (in the plate or baking tray, etc.) and shut the door.
* Follow these instructions:
- Insert the plug in the power socket
- Turn the thermostat knob clockwise to the temperature required
- Turn the selector switch to desiderate position
- Turn the timer knob to the time required: the pilot light and come on and the oven starts to heat: if cooking
time is not sufficient, restart the timer for the time still required.
When cooking is completed, turn the selector switch to "
from the power socket.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch it off, remove the plug from the outlet and wait for it to cool.
* To clean the outer surface always uses a soft cloth slightly damp with water only. For oven cleaning (shelf
grids and enameled baking tray), use a slightly moist soft cloth; do not use metal pads or abrasive products. Do
not wash it under running water, submerge it in water, or place it in a dishwasher. Before using the appliance,
make sure that it is perfectly dry, especially the contacts.
* Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive products.
* To replace the electrical cord a special tool is required: contact an authorised assistance centre for eventual
repairs.
* If you decide to stop using the utensil, we recommend making it inoperative by cutting off the power supply
cord (after first making sure that the plug is removed from the mains socket) and render harmless any parts
possibly used as toys.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when
you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
"; the thermostat to "0" and remove the plug
and leave the
10