Topcom BABYTALKER 2000 Instrucciones De Uso página 4

Idiomas disponibles

Topcom Babaytalker 2000

Do not mix old batteries with new ones.

Keep batteries away from small children

Do not short-circuit & dispose of in fire.

Remove the batteries if this device is not going to be used for a long period.

4.2

Baby unit power supply

1. Connect the small plug of the AC adaptor to the power connector of the baby unit and

the other end of the adapter cable to the electric socket (230V/50Hz).

Only use the enclosed adapter (6V DC / 200mA).

2. Press the On/Off button (14). The power (16) LED will illuminate.

3. Press and hold the On/Off button (14) to switch off the baby unit.

4.3

Parent unit battery Installation

1. Turn the belt clip facing upwards.

2. Turn the screw 90° of the battery cover (11) on the backside of

the parent unit in a counter clockwise direction using a screw

driver. Remove the battery cover (12). Do not try to rotate the

screw further than the position 'open'.

3. Install the enclosed 2 AAA rechargeable batteries following the

polarity as shown.

Do not install alkaline batteries!

4. Close the battery compartiment.

5. Press the On/Off button (2). The power LED (7) will illuminate.

6. Press and hold the On/Off button (2) to switch off the parent unit.

Topcom Babytalker 2000