Publicidad
Idiomas disponibles
Idiomas disponibles
BB-28.book Seite 18 Freitag, 18. März 2005 4:58 16
All manuals and user guides at all-guides.com
6
Operation
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please
also refer to the "Cleaning and maintenance" chapter on page 20).
6.1
Energy saving tips
Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device to cool.
Do not open the cooler more often than necessary.
Do not leave the lid or door open for longer than necessary.
6.2
Switching on the cooler
If you connect the device to the cigarette lighter or the 12 V socket
of your vehicle, remember that the ignition must be turned on to
supply the device with power.
Ensure that the objects placed in the cooler are suitable for
cooling/warming to the selected temperature.
➤ Place the device on a firm base.
➤ Connect the device with the cable supplied to the 12 V socket or the
cigarette lighter in the vehicle (3, page 3).
➤ Press the button (2 5, page 3) on the control panel to start "cooling"
or
Press the button (2 1, page 3) on the control panel to start "heating".
You can switch between heating and cooling modes during
operation by pressing the corresponding button.
✓ The cool box starts cooling/heating the interior and the appropriate LED
lights up.
LED
Right (2 4, page 3)
Left (2 2, page 3)
18
Operating mode
Cooling
Heating
BB-28
Publicidad
