Accessmatic Avanti AT 42 Manual De Usuario página 39

Avanti AT
Installation of motor
Installation of controller
1) Put square - head bolts into groove.
2) Fix it as the left g. Showing.
Installation of idler pulley
42 63
Figure 7
Figure 8
Figure 10
1) Put the square - head bolt into groove.
2) Fix the motor as the left g. Showing.
This screw must ve xed before the controller
intallation, otherwise the controller will not
be grounded.
1) Put square - head bolts into groove.
2) Fix it as the left g. Showing
Opening your life
Figure 9
1 10