Publicidad
Idiomas disponibles
Idiomas disponibles
10
DAB RADIO
Make sure that your local area can receive Digital Audio Broadcast (DAB)
broadcasting signal.
6 6
Press the DAB
button on the front of the panel, or remote
DAB channels are categorized into ensembles, which are also known as
multiplexes. Each multiplex provides a number of stations and each service
contains a primary service that can contain secondary services. DAB
technology allows broadcasters to transmit additional data along with the
audio, which can include other audio channels, text and even images and
computer data in the future.
DAB Radio Station Playing
6 6
1. Select DAB
Button from the front panel and the unit will scan for
available stations. After scanning you will see the following menu.
Station List
> BBC 1
BBC 2
2. Press the ENT
B B
button on the remote control to select the station and
start playing the station.
Storing a DAB station in a preset
While a DAB station is playing, push the memory button
the number of preset assigned from numeric keypad
DAB radio stations may be stored.
Playing a preset DAB station
When a DAB station is playing, you can switch to a preset station in one
of the following ways.
1. From the numeric keypad
3 3
station.
F F
2. Press the PRESET +/-
buttons on the remote to view preset numbers
and corresponding station. Press the up/down
F F
PRESET +/-
buttons on the remote control or turn the knob
front panel to choose the desired station, then press the ENT
on the remote control.
DAB Settings Menu
6 6
Press the DAB
on the front panel or remote
settings Menu. Turn the knob on the front panel or use the up/down arrow
buttons on the remote control to go through each sub-menu.
• STATION LIST: Shows station list.
• LOCAL SCAN: Start a limited scan of available stations by pressing
B B
the ENT
button on the remote control. (Not available in all markets).
• FULL SCAN: Start a full range scan of available stations by pressing the
ENT
B B
button on the remote control.
• MANUAL TUNE: Press the ENT
stations manually by turning the knob on the front panel or using the up/
down
B B
arrow buttons on the remote control.
K K
8 8
E E
3 3
D D
. Up to 30 preset
D D
, press the preset number of the desired
B B
arrow buttons or the
K K
to toggle to the DAB
B B
button on the remote control and select
• DRC, Dynamic Range Control: Select between "High", "Low" and "Off".
Press the ENT
front panel or use the up/down
to change.
.
• STATION ORDER: Display station order as either "Alphanumeric",
"Ensemble" or "Valid".
• PRUNE STATION: Select between "Yes" or "No". The Prune setting allows
you to remove stations that are not active or can not be received.
NOTE: Prune will remove unavailable stations from both the Station
List and the DAB Preset List.
• DAB PRESET: Displays all 30 of the DAB/DAB+ preset stations and
allows tuning to the selected preset by pressing the ENT
the remote control.
Remote Unit Advanced Buttons
SETUP
To enter the setup menu, press the MENU
and you will see the following display:
SETUP
, then press
> DISPLAY DIMMER
POWER LED DIMMER
• DISPLAY DIMMER: Changes the display brightness.
• POWER LED DIMMER: Changes the Power LED brightness.
NOTE: These settings are stored permanently even after the T11V02
is powered off.
• VERSION: Shows the software version loaded in the unit.
• FACTORY DEFAULT: Sets the unit into the original state as when it left the
7 7
on the
factory. Presets will be lost.
B B
button
• EXIT: Exits the setup menu.
DIM Button C C
Remote Only
Press the DIM button repeatedly to change the DISPLAY brightness.
NOTE: Adjustment made using the DIM
and not saved after powering off the T11V02.
EXIT Button I I
Remote Only
Pressing the EXIT button
playing status.
T11V02 DAB/FM Stereo Tuner
B B
button on the remote control and turn the knob on the
B B
arrow buttons on the remote control
H H
button on the remote control
C C
will revert from any menu and back to now
I I
B B
button on
button is temporary only
Publicidad
