Publicidad
Idiomas disponibles
Idiomas disponibles
VT 810
4. ELECTRIC DIAGRAM
5. OPERATING INSTRUCTIONS
1. Place the wine cooler on an even, horizontal and stable surface, well away from hot surfaces and
humidity.
2. Open the door (5) and place the shelves (6) onto the guides inside the wine cooler. Close the door (5).
3. Plug the wine cooler into a power socket and select the desired temperature (see "Adjusting the
temperature" section).
4. Leave the wine cooler on, and empty, for approximately one hour in order for it to reach the selected
temperature.
5. Once the wine cooler has reached the selected temperature, open the door
(5) and place the bottles of wine at room temperature on to the shelves (6). The bottles will reach the
selected temperature within approximately one hour.
The wine cooler will automatically set an on-and-off cycle in order to constantly maintain the selected
temperature.
Press the light button (4) to turn the inside light on and see what is inside the wine
cooler. To turn the light off, press the same button again.
Important: Close the door (5) properly and do not open it too often or for a long period of time, as the wine
will not reach the selected temperature.
6. ADJUSTING THE TEMPERATURE
Select the temperature inside the wine cooler by pressing the increase/reduce temperature buttons (2 & 3).
Press the "▲" button (2) to increase the temperature and press the "▼" button (3) to reduce it. The selected
temperature will appear on the temperature display screen (1).
Advice and recommendations:
• The recommended temperature for red wine is 14-16ºC
• The recommended temperature for white wine is 11-12ºC.
The temperature inside the wine cooler will depend on the room temperature.
7. TROUBLESHOOTING
Problem
The wine cooler is not
working
Possible causes
1. Fault in the power supply.
2. A fuse has blown.
Solution
1. Make sure that the wine cooler is plugged in
and that the power socket is switched on.
2. Change the blown fuse.
10
Publicidad
