Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

45183
24-HOUR INDOOR PLUG-IN
TIMER W/5 FT. TETHERED BUTTON
SET TIME
1. If no numbers are visible on-screen, plug timer into
an outlet and charge for 1 hour. Once charged, press
the reset (
) button in the lower-right corner using
a toothpick or pencil.
2. Use up (
) and down (
) arrows to set current
time, take note of AM or PM time.
Note: After timer is charged, it can be removed from the outlet
for easy programming. Return to outlet when finished. Timer
must be plugged in for indicator lights to function.
CHOOSE YOUR CUSTOM ON/OFF TIMES
Press ON TIME, then use up (
) and down (
to set on time. If you set the on time earlier than the
current time, it will not activate until the next day at the
time scheduled.
Press OFF TIME, then use up (
) and down (
to set off time.
Use the ON/OFF override to turn on the timer if needed
immediately.
When using on and off times, make sure the amber light
is lit next to the button. The amber lights only illuminate
when the timer is plugged into a wall outlet.
PRESET SCHEDULES
There are three preset times that run individually or
simultaneously. Choose from the following:
EVENING (5pm-12am)
MORNING (5am-8am)
ALL NIGHT (6pm-6am)
When a preset or custom program is chosen, the amber
LED indicator light will turn on.
If a preset schedule does not fit your needs, a custom
ON/OFF time can be used to modify the preset schedule.
Example: Using "evening" (5pm-12am) and adding
an off time of 10pm will create a 5pm-10pm
timer schedule.
You may select multiple preset times.
COUNTDOWN MODE
Press COUNTDOWN, then use up (
arrows to set from 1 minute to 24 hours.
The last countdown time set will become the new default
until it is manually changed. When in countdown mode,
time begins when tethered button is pressed on.
Note: When daylight saving time occurs, use the down (
and up (
) arrows to adjust the time by 1 hour.
TETHERED OVERRIDE BUTTON
If a scheduled program is running and the device is on, press
the tethered button to turn off the device. It remains off until
the next scheduled program begins or the button is pressed
again.
If a scheduled program is running and the device is off, press
the tethered button to turn on the device. It remains on until
the next scheduled program ends or the button is pressed
again.
If countdown mode is activated, the device turns on for the set
time or until the tethered button is pressed again.
All manuals and user guides at all-guides.com
READ IT OR WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit http://bit.ly/2XF7yPm
CLOCK
10: 10
ON TIME
EVENING
5PM 12AM
ALL NIGHT
6PM 6AM
) arrows
CLOCK
10: 10
) arrows
ON TIME
CLOCK
10: 10
EVENING
5PM 12AM
ALL NIGHT
6PM 6AM
ON TIME
CLOCK
10: 10
EVENING
5PM 12AM
ALL NIGHT
6PM 6AM
ON TIME
EVENING
5PM 12AM
ALL NIGHT
6PM 6AM
CLOCK
10: 10
) and down (
)
ON TIME
EVENING
5PM 12AM
ALL NIGHT
6PM 6AM
)
STOP
Questions? Contact our U.S.-based Consumer Care at 1-855-698-8324,
Monday–Friday, 7AM–8PM CST.
For the most up-to-date product support, accessories, electronic (PDF) format manuals and
more, visit www.byjasco.com/support.
FCC/IC
Suppliers Declaration of Conformity | Model #: 45183 | Jasco Products Co., 10 E. Memorial
Rd., Oklahoma City, OK 73114, www.byjasco.com
This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS
standards. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
COUNTDOWN
equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
OFF TIME
encouraged to try to correct the interference by one or more of the following measures:
MORNING
— Reorient or relocate the receiving antenna.
5PM 8AM
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from which the receiver
COUNTDOWN
is connected.
RESET
R
BUTTON
— Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
SPECIFICATIONS
125V 50/60Hz
15A 1875W General/Resistive
10A 1250W Tungsten
COUNTDOWN
1/2HP
Works with LED, CFL, incandescent and halogen bulbs
OFF TIME
COUNTDOWN
MORNING
5PM 8AM
COUNTDOWN
R
OFF TIME
COUNTDOWN
MORNING
5PM 8AM
COUNTDOWN
R
OFF TIME
MORNING
5PM 8AM
COUNTDOWN
R
COUNTDOWN
RISK OF ELECTRICAL SHOCK
• PLUG DIRECTLY INTO AN
ELECTRICAL OUTLET
• DO NOT USE IN WET
LOCATIONS
OFF TIME
• USE INDOORS ONLY
MORNING
5PM 8AM
• UNPLUG TIMER BEFORE
CLEANING
COUNTDOWN
• KEEP CHILDREN AWAY
R
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
This product is manufactured by Jasco Products Company LLC.
This Jasco product comes with a 2-year limited warranty. Visit www.byjasco.com for warranty details.
MADE IN CHINA/HECHO EN CHINA
©JASCO 2019 | 45183 | 07/22/19 v1
Jasco Products Company LLC.
10 E. Memorial Road
Oklahoma City, OK 73114
DO NOT RETURN THIS
PRODUCT TO THE STORE
WARNING
RISK OF FIRE
• DO NOT USE TO CONTROL
APPLIANCES THAT CONTAIN
HEATING ELEMENTS
(COOKING APPLIANCES,
HEATERS, IRONS, ETC.)
• DO NOT EXCEED
ELECTRICAL RATINGS

Publicidad

loading

Resumen de contenidos para Honeywell 45183

  • Página 1 READ IT OR WATCH IT FCC/IC Suppliers Declaration of Conformity | Model #: 45183 | Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS standards.
  • Página 2 (PDF), entre otros, visite www.byjasco.com/support FCC/IC Declaración de conformidad del proveedor | Modelo #: 45183 | Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com Este dispositivo cumple con las especificaciones del apartado 15 de las normas de la FCC y con las especificaciones de las normas radioeléctricas (RSS) del Ministerio de Industria de Canadá...