EcoAction
This option saves energy by reducing the water
temperature.
OptiDry
This feature senses when the unit is low on rinse agent
and automatically increases the drying time. For best
performance, always use a liquid rinse agent even if your
detergent contains a drying additive.
Sanitize Option
All models are designed to sanitize the loaded dishes.
Press the Sanitize Option button to activate the Sanitation
features. The technical sanitation measures may also
improve the drying results.
Child Lock
The child lock feature allows you to disable the dishwasher
control panel to prevent accidental program changes.
To activate:
•
Press and hold the button labeled "Child Lock" for 4
seconds. The child lock indicator will illuminate.
To disable:
•
Press and hold the "Child Lock" button for 4 seconds.
Cycle Completion Signal
A tone signals you when a cycle completes and the
dishwasher has washed and dried the dishes. You can
choose to disable the tone or adjust the volume.
NOTE: The unit must be powered OFF before activating.
To activate:
•
Press and hold the right "Cancel Reset" button then
press and hold the On/Off button.
•
When the light on the "Cancel Reset" button you are
pressing illuminates and the tone goes off, release
both buttons.
•
Press the far right "Cancel Reset" button until you
achieve the desired volume or until there is no tone
(to turn off ).
•
Press the ON/OFF button. The setting is now saved.
Countdown Display
The countdown display indicates the time remaining for
a cycle to complete. The time will change based on water
temperatures and control settings.
All manuals and user guides at all-guides.com
Info Light
Red LED illuminates the floor to indicate that the
dishwasher is running.
Sanitized Indicator
When the "Sanitized"
panel, it means that the dishware and kitchenware that
were just washed have been sanitized according to the
requirements of the National Sanitation Foundation (NSF).
For more information on NSF certification, go to the Wash
Cycle Information section of this manual.
Refill Rinse Agent Indicator
An indicator light will illuminate to alert you when more
rinse agent is required. For models with a display window,
the display will show "
light appears on the control
17