Panasonic VIERA TC-P42S30 Manual De Usuario página 48

Setup
Settings
Channel surf
mode
Language
Clock
ANT/Cable setup See p. 42-43 for more detail.
Input labels
(Display labels
of connected
devices)
Anti Image
retention
(Prevent Image
retention)
Network settings See p. 36-38 for more detail.
VIERA Link settings See p. 30-31 for more detail.
ECO/energy
saving
Keyboard type
Advanced setup Auto power on
First time setup
About
Reset to defaults
48
Other function settings
Items Item Description
All/Favorite/ Sets the mode to select the channel with the Channel up/down button.
Favorite: Only channels registered as FAVORITE. (p. 18)
Digital only/
Analog only
English/Español/ Selects the screen menu language.
Français
Adjusts the clock. (p. 15)
Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during the
input selection. (Input select (p. 21))
Terminals: HDMI 1-3/Component/Video
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/
OTHER/Not used
• You can also enter the label name directly. (Entering characters (p. 19))
Pixel orbiter Enable/Disable
(Wobbling)
4:3 side bars Off/Dark/Mid/
(4:3 mode only) Bright
Scrolling bar Press "OK" to start the horizontal "Scrolling" on the screen.
• Press any key except the POWER key to return to previous
screen.
• You will return to the previous screen if no key operation has
been performed for 15 minutes.
No signal for 10
To conserve energy, the TV automatically turns off when NO SIGNAL and NO
minutes OPERATION continue for more than 10 minutes.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set.
(Stay on/ Power
• "No signal for 10 minutes was activated" will be displayed for about 10 seconds
TV off)
when the TV is turned on for the first time after the power was turned off by "No
signal for 10 minutes".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
No activity for 3
To conserve energy, the TV automatically turns off when no operation of remote and
hours side panel key continues for more than 3 hours.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set.
(Stay on/ Power
• "No activity for 3 hours was activated" will be displayed for about 10 seconds when
TV off)
the TV is turned on for the first time after the power was turned off by "No activity
for 3 hours".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 19)
(U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin
America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On.
(No/Yes) TV AC cord must be plugged into this device. TV turns on every time the power is restored.
Image viewer Slideshow/Photos/
auto play
Videos/Music/
Set later/Off
Restarts the first time setup from "Language" setting. (p. 13)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings.
• Password setting/entering (p. 19)
Enable: Shifts the display image automatically.
Changes the brightness of the side bar
The recommended setting is "Bright" to prevent the panel
"Image retention". (p. 53)
Sets the media contents or playback type to play back SD
cards automatically.
Set later: "Image viewer settings" menu will be displayed repeatedly.
"Using Media player" (p. 22)
[Scrolling bar]