Descargar Imprimir esta página

Westinghouse iGen300s Manual De Usuario página 15

Estación de energía portátil

Publicidad

Idiomas disponibles

Idiomas disponibles

RECHARGING WITH SOLAR PANELS (OPTIONAL)
Make sure to use panel with 8mm output plug� Place solar panel where
it will get as much direct sunlight as possible� Plug the output of the solar
panel into the input on the back of the power station to start charging�
You will know the unit is charging when the red LED battery indicator
light is on� The unit is fully charged when all battery indicators on the
LED display are illuminated�
NOTICE: When solar recharging your power station, take note of the
voltages of the solar panels and do not exceed 19V� Individual solar
panels, or solar panels chained in series in excess of 19V cannot be
used with the power station and can cause serious damage to the unit�
For help on chaining solar panels, call our Customer Service Center at
1-855-944-3571�
COLD WEATHER USE
Cold temperatures (below freezing) can affect the unit's battery capacity
due to chemical characteristics of the battery� If you'll be living off-grid in
sub-zero conditions, we recommend you keep your unit in an insulated
cooler, and connected to a power source (solar panels)� The natural
heat generated by the unit contained in an insulated cooler will keep
battery capacity at its highest�
Westinghouse Outdoor Power Equipment - 15

Publicidad

loading