6. When the time is set, it will begin to count down
immediately. The display will show the remaining time.
7. Buzzer will bips for 30 seconds and the timer indicator shows
"- - " when the setting time finished.
Using the timer to switch off one or more cooking zones
1. Touching the heating zone selection control that you want
to set the timer for.
2. Touch timer control, the "00" will show in the timer
display. and the "0" fiashes.
3. Set the time by touching "+""-". (e.g.5)
4. Touch timer control again, the "0" will flash.
5. Set the time by touching "+" "-"(e.g.2), now the timer you
set is 25 minutes.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
14