Publicidad
Idiomas disponibles
Idiomas disponibles
English
3. Adjust the side handle
4. Switch on the tool and start working.
5. Always switch off the tool when work is finished and
before removing the battery pack.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories
WARNING: Since accessories, other than those
offered by CRAFTSMAN, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
CRAFTSMAN recommended accessories should be
used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN call 1-888-331-4569 .
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a CRAFTSMAN factory service center
or a CRAFTSMAN authorized service center. Always use
identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
WARRAnTY sERViCE: Registering your product will
•
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
FOR YOUR sAFETY: Registering your product will allow
•
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
•
Register online at www.craftsman.com/registration
10
3
as required.
Three-Year Limited Warranty
For warranty terms, go to https://www.craftsman.com/
support/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at CRAFTSMAN, 701 East Joppa Road,
Towson, MD 21286 or call 1‑888‑331‑4569.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country-specific warranty information contained in
the packaging, call the local company, or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑888‑331‑4569
for a free replacement.
sPECiFiCATiOns
Voltage
Type
No-load speed
No-load beats per muinute
Single impact energy (EPTA 05/2009)
Maximum drilling range in
steel
wood
concrete
Optimal drilling range
Maximum core drilling capacity in soft brick
Tool holder
Battery Type
Weight
Chipping
Noise Values [dB(A)]
Hammerdrill mode
L
(Emission Sound Pressure Level)
pA
L
(Sound Power Level)
WA
K (Uncertainty of Given Sound Level)
Chisel mode
L
(Emission Sound Pressure Level)
pA
L
(Sound Power Level)
WA
K (Uncertainty of Given Sound Level)
2
Vibration Values (m/s
)
Drilling into Concrete (Value a
Uncertainty K
Chipping/Chiselling (Value a
h,Cheq
Uncertainty K
Drilling into Metal (Value a
h,D
Uncertainty K
Screwdriving (Value a
)
h
Uncertainty K
CMCh233
20V
1
0–1500
0–5500
2.0 J
1/2" (13 mm)
1 1/2" (30 mm)
7/8" (22 mm)
5/32" (4 mm)–1/2" (13 mm)
2" (50 mm)
SDS PLUS
Li-Ion
5.07 lbs (2.3 kg)
Yes
81.9
92.9
3
83.6
94.6
3.3
)
13.1
h,HD
1.5
)
10.6
1.5
)
<2.5
1.5
<2.5
1.5
Publicidad
