Descargar Imprimir esta página

Ryobi P561 Manual Del Operador página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS
Motor .................................................................. 18 Volt DC
Cutting Capacity.....................................................1-1/2 in.
Total Blade Length............... 6 in. and 9 in. blades included
KNOW YOUR PRUNER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
UNPACKING
This product has been shipped completely assembled.
NOTE: See the Operations section of this manual for blade
installation instructions.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Pruner
Blades (6 in. and 9 in.)
Operator's Manual
All manuals and user guides at all-guides.com
FEATURES
ASSEMBLY
7 – English
Switch .............................................................Single Speed
Length of Stroke ........................................................ 1/2 in.
No Load Speed ................................. 0-3,200 s/min. (SPM)
LOCK-OUT BUTTON
Your pruner is equipped with a lock-out button which reduces
the possibility of accidental starting. The lock-out button
is located on the handle above the switch trigger. You can
depress the lock-out button from either the left or right side.
TOOLLESS BLADE CLAMP
Your pruner has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.

Publicidad

loading