6. Prepare the apparatus according to the unit weight, kg/lb selec-
All manuals and user guides at all-guides.com
ting the weight units kg/lb/st pressing the button on the back of the
scale, marked with the word "UNIT"
7. Switch on the scale, wait until "0,00" is shown on the display
and place the babygentlyon the surfaceof the scale.
8. If you want you can place a towel for a greater comfort for the
baby. In the event that the scale shows the same weight after pla-
cing the towel, simply press the TARE button so that the scale goes
back to "0.00"
9. Try to hold the baby still so that the weighing is as accurate as
possible.
10. To save energy, the device goes into sleep mode after several
seconds of inactivity.
11. Replace the unit in a safe and stable place.
This product has a maximum capacity of 20kg so you can weigh a
child weighing less than that. Place the baby in the centre of the
platform and avoid sudden movements, keep still and do not touch
other objects, until the scale shows their weight.
Contraindications:
This product is for domestic use only and not for professional pur-
poses.
Children must be supervised by an adult to prevent them using the
appliance as a toy.
This device is not designed to be used by persons (including chil-
dren) with reduced physical, sensory or psychological capacities, or
who lack the necessary experience and knowledge, unless they are
supervised by a person responsible for their safety.
Repair:
Only specialized personnel should perform repairs to this electrical
appliance. Any incorrectly performed repair may lead to considerable
risk for the user. In the event of repair, please always contact our
aftersales service. Failure to observe these instructions will lead to
the total loss of the product warranty.
TROUBLESHOOTING:
Possible operating anomalies
INCIDENT
The device
does not
work.
Error messa-
ge "O-Ld"
6
CAUSE
Device not
switched on
or misplaced
battery.
The device is
damaged.
Overload
SOLUTION
Press the on/off button.
Check that the battery is insta-
lled with the right polarity.
Contact the Daga technical
service.
It means that it has exceeded
the maximum weight