Descargar Imprimir esta página

Philips AZ9111 Manual página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
Remote control
Use the AY 3764 cord remote control. The buttons on the remote control have the
same functions as the corresponding buttons on the CD player.
1 If necessary press 9 once or twice until the unit is switched off.
2 Firmly connect the remote control to LINE OUT/p and the headphones to the
remote control's jack.
3 Turn the volume down with VOL F on the remote control and set VOL E on
the CD player to position 8.
Optical out
(not on all versions)
You can connect your CD player to digital equipment (e.g. a CD recorder) with a
DIGITAL OPTICAL IN/AUX jack.
1 Use the power adapter, switch off ESP and turn down the volume of the appliance
that should be connected.
2 Connect an optical cable or signal lead to the OPT OUT jack of your CD player and
to the DIGITAL OPTICAL IN/AUX jack of the other appliance.
• To adjust volume and sound, use the controls of the connected appliance.
Notes: – For analog connections use the LINE OUT/p jack.
– Playback via OPT OUT does not work if the player is powered by batteries.
18
(not on all versions)

Publicidad

loading

Este manual también es adecuado para:

Az9225Az9143Az9113Az9213Az9141Az9214 ... Mostrar todo