Publicidad
Idiomas disponibles
Idiomas disponibles
– Align the height of the measuring tool (using a tripod or by underlay-
ing, if required) in such a manner that the cross point of the laser lines
is projected against the previously marked point II on the wall B.
A
B
– Without changing the height, turn around the measuring tool by
180°. Direct it against the wall A in such a manner that the vertical
laser line runs through the already marked point I. Allow the measur-
ing tool to level in and mark the cross point of the laser lines on the
wall A (point III).
A
B
180°
d
– The difference d of both marked points I and III on wall A indicates
the actual height deviation of the measuring tool.
The maximum permitted deviation dmax can be calculated as follows:
-23-
Publicidad
