Descargar Imprimir esta página

Ryobi RPW120B Traducción De Las Instrucciones Originales página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
Safety, performance, and dependability have
been given top priority in the design of your
electric high pressure cleaner.
INTENDED USE
The electric high pressure cleaner is intended
only for outdoor use. For safety reasons, the
product must be adequately controlled by
using two-handed operation.
The product is designed for home or domestic
use. It is intended to clean machines, vehicles,
buildings, fl oors, tools, facades, terraces,
fl oors, and concrete walkways by removal of
stubborn dirt using clean water with or without
cleaning detergent.
The product can be used with turbo nozzle,
spray nozzle, wash brush, and surface
cleaner. The turbo nozzle is used for normal
cleaning. The spray nozzle is used for
cleaning surfaces that require spraying or with
the use of detergent. The wash brush is used
for effective cleaning of cars, bikes, or other
items that require spraying or with the use
of detergent. The surface cleaner is used for
cleaning and brushing surfaces.
It should be used in well-illuminated conditions.
Do not use the product for any other purpose.
WARNING
The product is designed for use with a neutral
cleaning agent supplied or recommended by
the manufacturer. The use of other cleaning
agents or chemicals may adversely affect
the safety of the product.
GENERAL SAFETY WARNINGS
WARNING
Read
all
safety
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fi re, and/or serious injury.
CAUTION
The product must not be used on the drinking
water supply without a backfl ow preventer
being installed that corresponds to EN 12729
Type BA. Water fl owing through a backfl ow
preventer
is
considered
Always observe the regulations of your local
water utility company when connecting the
product to a water supply line.
warnings
and
all
non-drinkable.
The product is not intended for use by
children or persons with reduced physical,
sensory, or mental capabilities, or lack
of experience and knowledge. Children
should be adequately supervised to ensure
they do not play with the product.
Wear a complete personal protective
equipment when operating the product,
such as boots, safety gloves, safety
helmets with visor, and hearing protection.
Use high-impact visors only with liquid
splash protection.
WARNING
Do not use the product when people are
within range, unless they wear protective
clothing.
To reduce the risk of injury, keep children
and visitors away. All visitors should wear
safety glasses and be kept at a safe
distance from the work area.
Inspect the safety devices, such as safety
valves,
flow
switches,
switches to check if they are in good
working condition. Make sure all safety
devices are operating properly before each
use, such as:
On/Off switch
The
on/off
unintentional
product.
Trigger handle lock
The trigger handle lock locks the
trigger and prevents unintentional
opening of the high-pressure jet.
Total stop switch
The total stop switch prevents the
permissible working pressure from
being exceeded. If the lever on the
trigger gun is released, the pressure
switch turns off the pump and stops
the high-pressure jet. If the lever is
pulled, the pump turns on again.
Overload protection
A thermal sensor protects the product
from overloading. The product will
automatically shut the power down
while overheating.
Do not use the product if the important
parts are damaged, such as safety devices,
high-pressure hoses, or trigger gun.
Exercise caution when opening the trigger.
Hold the handle firmly with two hands to
avoid injury when the handle kicks back.
and
pressure
switch
prevents
operation
of
the
English |
1
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

Publicidad

loading