GE GDF 565 Serie Manual Del Propietário página 14

Loading
On some models, the upper rack may be adjusted to
accommodate larger items. To adjust the upper rack, fully
extend the upper rack and lift the front of the rack so that
the rack roller wheels clear the end hooks on the front of
the rails. Continue to pull the rack until the remaining rack
roller wheels clear the end hook. Select the set of rollers on
the side of the rack that provides the desired height, and
reinstall the upper rack by aligning the rack roller wheels
on the end hook and rack rails – Ensure that there are
roller wheels above and below the rack rails. Failure to
properly align the wheels onto the end hook and rails may
result in the rack falling from the dishwasher.
To add flexibility in loading, the stem safe shelf (on some
models) may be placed in the up or down position or
unfolded and placed in the lower unfolded position.
The shelf may also be used to secure stemware such as
wine glasses. Because these stemware items come in
various sizes, slowly push the rack in to ensure the items
do not bump into the edges of the dishwasher, which
may cause damage to the items.
The fold down tines (on some models) provide flexibility
for extra-large and hard-to-fit items. The tine rows can be
adjusted to a vertical or lay-down position.
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware
baskets may vary from your model.
8 Place Settings - Upper Rack
Models - GDF565, GDT565, GDF645, GDP645,
GDT645, GDT665, DDT700, PDP715, PDT715,
PDT775, PDT785
14
Rail
Rack Rollers
Place the
slots in the
utility shelf
clips over
the vertical
rack wires
and push
down to attach
utility shelf
onto second
wire of rack
10 Place Settings - Upper Rack
Models - GDF565, GDT565, GDF645, GDP645, GDT645,
GDT665, DDT700, PDP715, PDT715, PDT775, PDT785
Rail
End
Hook
Upper
Rack
Pull rack out,
lift up and over
rail end hooks,
and pull out to
remove
Rail
End
Hook
49-4000214 Rev 2