Publicidad
Bracket: How to Remove the M.2 SSD (Type 2280) and the Bracket
C1
如何移除2280 M.2 SSD及其托架 / So entfernen Sie die M.2-SSD (Typ 2280) und die Halterung / Comment faire pour retirer le SSD M.2 (type 2280) et le support / Come rimuovere
l'SSD M.2 (tipo 2280) e la sta a / Retirada de la unidad de estado sólido M.2 (tipo 2280) y del soporte /
Como remover o M.2 SSD (Tipo 2280) e a braçadeira / M.2 SSD(타입 2280) 및 브래킷 제거 방법 / M.2 SSD（タイプ2280）とブラケットを取り外す方法
1. Release the screw and carefully remove the M.2
2. Release the screw and remove the bracket
SSD (Type 2280).
from the motherboard.
M.2 SSD: How to Install the M.2 SSD (Type 2260)
C2
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2 /
M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
1. Locate the M.2 slot on the motherboard.
2. Carefully insert the M.2 SSD into the
Install the stando .
slot.
2.5-inch Hard Drive: How to Install the Hard Drive
D
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
VIDEO TUTORIAL
Scan the QR code to watch the
step-by-step video tutorial on how
1. Remove the four screws on the bottom case.
to install the hard disk drive on
en li up and remove the bottom panel.
the
Series.
4X4 BOX-7000/D5
3. Attach the HDD assembly to the bottom
4. Connect the SATA Cable to the connector.
panel and secure it using the four screws.
.2 (
2280)
/
3. Tighten the screw to secure the M.2 SSD
to the motherboard.
/
2. Attach the HDD to the hard drive
mounting bracket and secure it using
the four screws.
en connect the SATA
Data and Power Cable to the HDD.
5.
en reinstall the bottom panel.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
2. Attach the VESA Bracket to the rear of
4X4 BOX-7000/D5 Series.
a compatible display using the four screws.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
Positions of the 4X4 BOX-7000/D5 Series
4X4 BOX-7000/D5系列擺放 / Positionen der 4X4 BOX-7000/D5 Series / Positions de la série 4X4 BOX-7000/D5 / Posizioni della 4X4 BOX-7000/D5 / Posiciones de la 4X4 BOX-7000/D5 /
4X4 BOX-7000/D5 / Posições de 4X4 BOX-7000/D5 / 4X4 BOX-7000/D5 시리즈의 위치 / 4X4 BOX-7000/D5シリーズの位置
e 4X4 BOX-7000/D5 Series can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
VESA-mounted
*Please note that keeping the 4X4 BOX-7000/D5 Series in a vertical position will ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
3. Mount the 4X4 BOX-7000/D5 Series by sliding
it into place.
Publicidad
