Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
•
Keep the power plug and cord away from heated surfaces.
•
Do not leave the appliance unattended while plugged in.
•
Do not place the appliance on any soft furnishings.
•
Do not use attachments other than those we supply.
•
Do not set the appliance down while still on.
•
Do not twist or kink the cable, or wrap it round the appliance.
•
Do not use the appliance if it is damaged or malfunctions.
•
Check the cord regularly for any sign damage.
•
This appliance is not intended for commercial or salon use.
PARTS
1. Outlet grille with advanced conditioning
technology
2. Heat selector switch (N)
3. Speed selector switch (E)
4. Cool shot on/off switch ( )
5. Hydracare on/off switch ( )
INSTRUCTIONS FOR USE
•
Wash and condition your hair as normal.
•
Squeeze out excess moisture with a towel and comb through.
•
Hairsprays contain flammable material – do not use while using this product.
•
Fit accessory attachments by pushing it on to the front of the hairdryer. Take care when
you do this because the attachments can become hot during use.
1.
Plug the product into the mains power supply.
2.
Switch your hairdryer on and select the desired speed setting (low or high) using the
speed selector (E) switch.
3.
Select the desired heat setting ( low, medium, or high) using the heat selector (N)
switch.
To use the Hydracare function see Using the Hydracare Function below.
4.
5.
After use, turn the appliance off and unplug it.
Using the Hydracare Function
1.
Select the hydracare function using the hydracare on/off switch ( ).
2.
The Hydracare icon ( ) will illuminate during styling indicating the sensor is
continuously regulating the temperature of the air directed to your hair, protecting
against excessive heat build-up without compromising on your styling results.
4
6. Hydracare ON icon ( )
7. Slim concentrator
8. Styling concentrator
9. Diffuser
10. Inlet grille
Publicidad
