ASROCK A55M-DGS Manual Del Usuario página 25

ATX Power Connector

(24-pin ATXPWR1)

(see p.2 No. 7)

Though this motherboard provides 24-pin ATX power connector,

it can still work if you adopt a traditional 20-pin ATX power supply.

To use the 20-pin ATX power supply, please plug your power

supply along with Pin 1 and Pin 13.

ATX 12V Power Connector

(4-pin ATX12V1)

(see p.2, No. 1)

Serial port Header

(9-pin COM1)

(see p.2 No.21)

2.10 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical

drive first. Then, the drivers compatible to your system can be auto-detected and

listed on the support CD driver page. Please follow the order from up to bottom side

to install those required drivers. Therefore, the drivers you install can work properly.

2.11 Installing Windows

XP 64-bit With RAID Functions

If you want to install Windows

on your SATA / SATAII HDDs with RAID functions, please refer to the document at

the following path in the Support CD for detailed procedures:

..\ RAID Installation Guide

20-Pin ATX Power Supply Installation

7 / 7 64-bit / Vista

ASRock A55M-DGS Motherboard

Please connect an ATX power

supply to this connector.

Please connect an ATX 12V

power supply to this connector.

This COM1 header supports a

serial port module.

/ Vista

64-bit / XP /

/ Vista

64-bit / XP / XP 64-bit