LG WM2487H MA Serie Guia Del Usuario página 11

H O W TO U S E
THE LED DISPLAY
The LED display shows the settings, estimated time remaining, options, and status messages
for your washer. When the washer is turned on, the display will illuminate.
1
LOAD
WASH RINSE SPIN
SENSING
1 CYCLE COMPLETION INDICATOR
This portion of the display shows which stage
of the wash cycle is currently underway (LOAD
SENSING, WASH, RINSE or SPIN
ESTIMATED TIME REMAINING
2
When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the cycle,
as is typically shown on a top-loading washer.
0
3 2
4
3 DOOR LOCk INDICATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating. The
door can be unlocked by pressing the START/
PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the DRAIN & SPIN cycle to drain
excess water. Do not try to force open the door.
4 DELAY WASH INDICATOR
STEAM CYCLE
COTTON/NORMAL
This indicator shows that the washer has PERM. PRESS
BABY WEAR
been set for DELAY WASH. The washer will
BULKY/LARGE DELICATES
start automatically after the set delay time
has passed.
SANITARY HAND WASH/WOOL
STEAM FRESH TM SPEED WASH
OPERATING THE WASHER
Once you have loaded the washer and added
laundry products (detergent, bleach, and/or
fabric softener):
1
Press the ON/OFF button to turn on the
washer. The lights around the cycle
selector knob will illuminate.
2
Turn the cycle selector knob to the desired
cycle. The display will show the
preset Rinse/Wash Temperature,
Spin Speed, Soil Level, and
Option settings for that cycle.
3
If you would like to change the settings for
that cycle, press the appropriate cycle set-
tings button(s) until the indicator light for the
desired setting is lit.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
4 Select any additional cycle options, such as
DELAY PRE-WASH
STEAM
WASH
* CHILD LOCK
LOAD WASH RINSE SPIN
SENSING
RINSE
+SPIN
HIGH *
EXTRA HOT/COLD EXTRA HIGH HEAVY DRUM LIGHT
HOT/COLD HIGH
EXTRA
RINSE
LOW
MEDIUM NORMAL
WARM/WARM
* TUB CLEAN
LOW
WARM/COLD
STAIN
OFF
NO SPIN LIGHT
COLD/COLD CYCLE
* SPINSENSE™
WATER
PLUS
WASH/RINSE SPIN SPEED SOIL LEVEL BEEPER
OPTION
* PRESS & HOLD 3SEC
FOR EXTRA FUNCTIONS
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
H O W TO U S E
5 Press the START/PAUSE button to begin
the cycle. The door will latch,
the display will change, and
the washer will calculate the
estimated time remaining. Once
the washer has calculated the estimated
total cycle time, the washer will start. To
pause the cycle at any time, press PAUSE.
NOTE: The cycle time displayed may
appear much longer than that of a top-
loading washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN cycle to
drain excess water. Do not try to force the
door open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle and setting the Soil
Level button to Light.
6 When the load is finished, the beeper (if set)
will sound and the door will unlock.
STEAM or DELAY
Remove damp clothes from the washer
by pressing the
immediately. Check under the door seal
button for that
for small items.
option.
1