Tena SmartCare Change Indicator Guía Rápida página 3

Components
SENSOR STRIP
Comes in three lengths –
choose according
to the absorbent product
(see the instruction for use)
TRANSMITTER
Buttons
LED light
BATTERY, CR2032
GATEWAY
LED light
Button
POWER ADAPTER
ADHESIVE STRIP
4
Set up the system
1
The Change Indicator transmits information to the TENA SmartCare
app and dashboard via gateways installed in residents' rooms and common areas. To start
use the Change Indicator, the system should be set up in the TENA SmartCare Dashboard.
1.1 Set up the dashboard 1.2 Install the app
Set up the system
smartcarepro.tena.com
TENA SMARTCARE
PROFESSIONAL APP
TENA SmartCare
TENA SmartCare
dashboard. Professional app
1.3 Set up the gateway
Blinking light
= connecting
Allow up to 60 seconds for the light to start blinking
and another 60 seconds for it to turn green.
Professional Care
TM
QR-code to App Store
To App Store To Google Play
(iOS) (Android)
10 m / 33 ft
The gateway
should be
placed within
33 ft/ 10 m
of the Change
Indicator.
Steady light No light
= connected = OK
5