Sears 316.74093 Manual Del Operador página 9

8. Tilt the handle to the desired position.
9. Flip the latch lever down to secure the handle.
Adjusting the Handle
If the handle requires adjustment:
1. Flip the latch lever up to loosen the handle (Fig. 8).
2. Hold the unit in the operating position (Fig. 21). Move the handle
up or down the upper shaft housing to a comfortable location
(Fig. 8). Make sure the handle is positioned beyond the end of
the safety label (Fig. 8).
3. Tilt the handle to the desired position.
4. Flip the latch lever down to secure the handle.
Front
Handle
Bracket
Coupler
Nut (x4)
Bolt (x4)
Small
Hook
Large
Hook
Handle
Upper Shaft
Housing
9
Ball
Rear
Handle
Bracket
Fig. 5
Fig. 6
Latch Loop
Latch
Lever
Latch Pin
Fig. 7
Safety Label
Latch Lever
Fig. 8