Publicidad
Idiomas disponibles
Idiomas disponibles
GB
INSTRUCTIONS FOR INSTALLATION AND USE
FOREWORD
Thank you for having chosen this machine.
If you follow the present instructions
carefully you will certainly be satisfied with
its performance and guarantee.
In the event of claims or comments, the
reference text will be considered the one
written in the manufacturer's native language,
that is, in Italian.
1. GUARANTEE
- The guarantee has a validity of twelve (12)
months starting from the date of purchase of
the appliance or of any integral part of it.
- The guarantee covers the replacement of
any defective parts which are ensured as
having been damaged during manufacture.
It is applied directly by the dealer.
- Labour costs are always to be met by the
purchaser, together with transport, packaging
costs, and transport risks.
- The guarantee is subordinated to the re-
stitution of damaged parts which have to be
sent CARRIAGE PAID along with
information on the appliance, such as model,
serial number and defect of the machine in
which the damaged part was mounted.
- The guarantee is not valid if the appliance
has been misused or if there have been mis-
takes in the electrical connections, wrong or
inappropriate installation, regardlessness of
the instructions concerning assembly and
use or changes carried out by unauthorised
persons. The guarantee is void when the
serial number has been scratched or taken
off or altered in any way.
- The guarantee is not valid for the following
items: parts which are subject to a normal
wear like belts, valve membranes and rubber
parts at large. Electric components like motor,
coils, contactors, heaters and so on.
2. INTRODUCTION
The present booklet has been drawn up in a
simple and rational way, so as to acquaint the
reader with the appliance. Please, read it
carefully and keep it with the machine yet
consider that the warning and advice
contained in this manual might not cover
every possible contingency. This is why it is
important to point out that common sense,
care and caution cannot be supplied with the
machine, but must be supplied by those
responsible for its installation, maintenance
and use. Whoever operates the machine must
read this manual beforehand.
Should the appliance need repairing, the ma-
nufacturer recommends the use of original
spare parts (paragraph 8.4 explains how to
order them).
All manuals and user guides at all-guides.com
The descriptions and sketches given in this
manual do not bind the manufacturer, who
reserves the right to duly update them and/or
include any upgrading modification of parts
and fittings as he deems necessary for manu-
facturing or commercial purposes, at any
time and without previous notice.
3.INSTRUCTIONS, RESTRICTIONS
AND OTHER USES
During use, cleaning and maintenance proce-
dures; it is absolutely necessary to make sure
that the moving parts of the appliance (motor,
chain, etc.) must not be reached with tools or
hands. The manufacturer declines any
responsibility for any injury arising during
use, cleaning or maintenance procedures.
When using any electric or electronic ap-
pliance one must comply with certain basic
rules. In particular: do not touch the machine
with damp or wet hands or feet; do not use it
while barefoot. Do not expose the appliance
to atmospheric agents like rain, salt, salinity,
etc. Do not allow children or unqualified
people to use the appliance without proper
supervision. Do not iron fabrics which are
not heat-resistant with high temperatures.
Do not iron layers of laundry which are
thicker than 8 mm or laundry which is not
suitable for this type of ironer, or clothes that
contain humidity exceeding the recom-
mended limit. Do not smoke near the machine
or while using it. Do not remove or ignore
safety devices. Do not leave any-thing on the
hot parts of the appliance, not even when
ironing has been finished, because the basin
needs a long time to cool. Do not clean the
machine by using direct or indirect water
jets; therefore, install it far from areas where
water jets are used.
ANY USE NOT EXPRESSLY MEN-
TIONED HERE BELOW MUST BE
CONSIDERED AS HAZARDOUS. THE
MANUFACTURER DECLINES ANY
RESPONSIBILITY FOR DAMAGE
DUE TO IMPROPER, WRONG OR
FOOLISH USE.
DISCONNECT THE APPLIANCE
FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY SERVICING.
8
INSTRUCTIONS
FOR THE INSTALLER
4. INFORMATION ABOUT SHIPPING,
UNPACKING, MOVING AND STORING
THE MACHINE
4.1. SHIPMENT
To transport and/or ship the appliance, follow
these suggestions carefully:
When carrying the appliance into a building,
use the appropriate pallet or a similar
platform; use a manual or electric fork lift
possessing the requisite hoisting capacity
and suitable for handling such appliances
(see technical data, page 28). Check that the
ironer can surmount any existing obstacle or
narrow passage (like staircases, doors, etc.).
Never drag the appliance by a side panel
or any other part.
When shipping the ironer, use only the ori-
ginal packing material to ensure sufficient
stability during transport.
4.2. STORAGE
Should the appliance be stored for a long
period before being installed, keep it in its
original package, as this guarantees best
protection. Check that the room conditions
correspond to those mentioned in paragraph
5.3. If the ironer is not to be used for a long
period after startup, make sure that it is
disconnected from the electric power supply
and cover it with its original, plastic
protection bag.
4.3. UNPACKING
1) Prior to accepting the ironer from the car-
rier, check that the packing material does not
show any damage. If it does, the machine too
might have sustained the consequences. If
so, unpack the machine in the presence of the
carrier and sign the delivery note with some
reservations. The manufacturer assumes no
liability for any damage due to transport or
incorrect storage.
2) Unpack the appliance with the utmost
care so as to avoid damage. Remove the
transport pallet by unscrewing the screws
from the inner right and left side panels.
3) Assemble the wooden board onto the
appropriate supports by means of the grub
screws and appropriate bolts as shown in
fig.6; the upper end of the screw and the
longer side of the board must face upwards.
4) Make sure that the instruction booklet,
which is usually stuck on the outside of the
package, is not discarded and lost.
Packing material (plastic bags, polystyrene,
Publicidad
