Avintage AVI47XDZA Manual De Utilización página 50

Handle installation
Your appliance is equipped with a stainless steel handle. To install it, simply screw it onto the door with
the screws provided, following the diagram below. Please be noted that you need to remove the
magnetic seal before screwing the handle. Once the handle is properly tightened, please reposition the
gasket gently. Make sure the seal allows the cellar to be completely sealed.
CAUTION: do not overtighten the screws.
Reversing the door
The door can be changed from left and right side. No special requirement, all the door is opened from
left side. If required to open from right side please refer to the following direction.
1) Screws
2) Decoration plug
3) Top hinge pin
4) Right top hinge plate
5) Glass door
6) Left top hinge plate
7) Lower hinge plate
8) Lower hinge pin
9) Screws
10) Cabinet
11) Screws
12) Lower hinge plate
13) Screws
14) Lower part of the cabinet
50