Before Use; Operation - cecotec BAMBA PRECISIONCARE EXTREME 5IN1 Manual De Instrucciones

EN

3. BEFORE USE

• Take the product out of the box.
• Remove all packaging materials. Keep the original box.
• Make sure all the components are included and in good conditions,
otherwise, contact immediately the official Technical Support
Service of Cecotec.
• Before the first use, charge the device for 2 hours for optimum

operation.

4. OPERATION
1. Select the attachment that best fits your personal needs.
2. Assemble the desired attachment to the top part of the device's
body.
• To remove the shaver head or any other attachment you have
assembled, hold the trimmer body with one hand and slightly turn
it anticlockwise with the other hand.
• To assemble a different one, insert the attachment into the
trimmer's slot and then turn it slightly clockwise to fix it into place.
• To assemble the beard guide comb attachment, introduce the
shaver head inside the guide comb and lock into place the
attachment's fixing tab.
• The guide comb includes a length-adjustment knob. Adjust it from
0.5 mm to 10 mm and adapt it to your desired haircut.
• To remove the comb attachment, pull the back part off the product
until the fixing tab is released and then slide the comb off the
blade.
3. 3. Slide the switch upwards to turn the device on and slide it
downwards to turn it off.
Note: The length of the cut may vary depending on the trimming angle.
38
04229_Bamba PrecisionCare Extreme 5in1_Manual.indd 38 2/8/19 9:40