HIKVISION DS-MDH005-B Guia De Inicio Rapido página 5

All manuals and user guides at all-guides.com
Use of the product must be in strict compliance with the local laws and

regulations. Please shut down the device in prohibited area.
Use of the product must be in strict compliance with the local electrical

safety regulations.
Use the power adapter provided by qualified manufacturer. Refer to the

product specification for detailed power requirements.
It is recommended to provide independent power adapter for each

device as adapter overload may cause over-heating or a fire hazard.
Make sure that the power has been disconnected before you wire,

install,
or disassemble the device in the authorized way according to the
description in the manual.
To avoid electric shock, DO NOT directly touch exposed contacts and

components once the device is powered up.
DO NOT use damaged power supply devices (e.g., cable, power adapter,

etc.) to avoid electric shock, fire hazard, and explosion.
DO NOT directly cut the power supply to shut down the device. Please shut

down the device normally and then unplug the power cord to avoid data
loss.
DO NOT block the power supply equipment to plug and unplug

conveniently.
Make sure the power supply has been disconnected if the power adapter is

idle.
Make sure the device is connected to the ground firmly.

To avoid heat accumulation, good ventilation is required for a proper

operating environment.
Store the device in dry, well-ventilated, corrosive-gas-free, no direct

sunlight, and no heating source environment.
Avoid fire, water, and explosive environment when using the device.

Install the device in such a way that lightning strikes can be avoided.

Install a lightning arrester if necessary.
Keep the device away from magnetic interference.

Avoid device installation on vibratory surfaces or places. Failure to

comply with this may cause device damage.
4
English