Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK PROGRAMMING GUIDE 912-TP QPSK TO PAL DiSEqC
Start/on
Main menu
Transcodifi cador 912 QPSK - COFDM
Select series
NIT Table
Select series
912-TP Transmodulator QPSK-PAL DiSEqC
912-TQ Transmodulator DVB-S/S2 to DVB-C
912-TP Transmodulator QPSK-PAL DiSEqC
Confi gure module
Set the programming switch of the 912-TP module to the ON position. The programming
Input
Power LNB
off
off
off
on
Sat Band
Low (0)
Low (0)
High (22KHz)
Sat Polarity
Vertical (13V)
Vertical (13V)
Horizontal (18V)
Sat Position
A
A
A
B
C
D
Input frequency
1952
Symbol rate QPSK
1000
FEC QPSK
Auto
Output
OSD Language
English
Standard
BG/ stereo
OK
OK
OK
indicator will now light up and remain lit.
OK++OK
OK++OK
OK++OK
OK++OK+T
MHz
Keypad + T
Keypad + T
KBd
OK++OK+T
OK++OK+T
OK++OK+T
Press the Power On key of the PS-011 to start up the
system.
Choose Select Series to select the programming series.
Select the series: 912-TP Transmodulator QPSK -PAL
DiSEqC.
To commence programming the module, select Confi gure
module.
Select LNB Power supply on/off. Only if the power
supply of the LNB is set to ON, select the satellite band
(High/Low), the polarisation (Vertical/Horizontal), and
the position of the satellite. Then press T to transmit.
Use the numeric keypad to enter the IF frequency of the
transponder. Then press T to transmit.
Using the numeric keypad, enter the symbol rate of
the transponder. Then press T to transmit.
Select the error correction rate (FEC QPSK) of the
transponder. By default it is set to Auto. Then press
T to transmit.
Select the language of the OSD. Then press T to
transmit.
Select the standard for the output channel. Then press
T to transmit.
ENG
Publicidad
