Uline H-9235 Manual De Instrucciones página 3

c. Remove alignment hole pins where hip rafters (HR)
are attached to crown. (See Figure 7)
Figure 7
4. Repeat steps 3b-3c to connect three full rafters (FR)
to the 6-way crown. (See Figure 8)
Figure 8
FR
HR
FR
5. Beginning at a corner fitting, attach eave poles (EV)
to corner fittings and 4-way side tee fittings, working
clockwise around the assembly to complete the first
end bay. Attach to hip rafters (HR) and full rafters (FR).
(See Figures 9-10)
Figure 9
EV
EV
Figure 10
PAGE 3 OF 24
ASSEMBLY CONTINUED
HR
FR
FR
HR
Completed
First End Bay
6. Repeat steps 2-5 to complete second end bay.
(See Figure 11)
Figure 11
Completed
Second
End Bay
7. Move end bays together and connect with ridge
pole (RG) and two eave poles (EV). Secure with
frame pins. (See Figure 12)
Figure 12
EV
8. Loop end of each ratchet strap to fitting at each
leg location. (See Figure 13)
Figure 13
EV
RG
Ratchet
Strap
0721 IH-9235