Adler europe AD 2248 Manual De Uso página 4

immediately remove the power plug or power adaptor from the socket. If the device is
powered, do not put hands in the water. Have the device checked by the qualified electrician
before using it again.
18. Do not touch the device or power adaptor with wet hands.
19. The device has to be turned off after every use.
20. Do not leave the unit on to the wall outlet or power supply unit unattended.
21. The device is not designed to work with external schedulers or separate remote control
system
22. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
23. The power cord should not touch hot parts of the device and should not be located near
other heat sources.
24. Do not wrap electric cable around the device.
25. Do not use a hair curling iron in the bath.
26. Do not remove dust or foreign bodies from the inside of the hair straightener using sharp
objects.
27. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
28. Do not cover the hair curling iron, it might cause the accumulation of heat in its interior
and it may cause damage or fire.
29. Hairsprays contain flammable materials. Do not apply them while using the device.
30. Do not use the device on people who are sleeping.
31. The device can be supplied only with the voltage specified on the housing.
32. During operation, do not place the device on wet surfaces or clothes.
33. After using the machine, switch it off, remove each plug the power cord from the wall
outlet and wait before putting it to cool down.
34. Always before applying pieces of equipment on the device, make sure they are dry
outside and inside.
35. Do not obstruct in any way the inlet and the air outlet, eg .:by hair.
36. Do not direct the hot air flow on the power cord
37. Do not direct hot air toward eyes or other sensitive areas..
PRODUCT DESCRIPTION (pic. 1)
1. - handle 2. - speed adjustment switch
4. - inlet cover grill 5. - hang-up loop
7.- IONIC switch 8. - IONIC lamp
USING THE DEVICE
Set the desired speed with the switch (2):
0 - disabled 1 - low speeds 2 - high speed
Set the desired temperature using the switch (6):
1 - warm air 2 - hot air 3 - very hot air
IONIC function:
* When you setting the switch (7) ON - the lamp (8) changes color from blue to green - the ionic air will switch ON.
* When you setting the switch (7) OFF - the lamp (8) changes color from green to blue - you will return to ordinary hair drying function.
The ionic air reduces the tendency to the hair electrification and gives the hair shine.
CLEANING AND MAINTENANCE
1. Clean inlet cover grill (4) regularly from loose hair or other dust.
2. Dirty housing clean with wet soft cloth, then wipe to dry. Do not use any aggresive detergents.
3. Avoid any liquid to reach inside of the hair dryer.
TECHNICAL DATA
Power: 1800 W - 2200 W
Voltage: 220-240 V ~ 50/60 Hz
3. - concentrator
6. - temperature adjustment
9. - cool shot
Maximum power: 2400W
4