Publicidad
Idiomas disponibles
Idiomas disponibles
19 electrolux how to use
How to use
1
2
Lock panel button
1
Internal light power on button
2
Temperature indicator
3
How to use
This wine cellar uses the electronic cooling system that ensures more stable
temperature. This system can reduce the cooling temperature up to 12°C and
its recommended for red wine.
Turning on the wine cellar
When the power cord is plugged into the outlet, the wine cellar will sound an
alert tone and all the lights on the display will flash for 3 seconds. If the
temperature inside the cellar is above 18 °C, the screen continues to display
this value until the selected temperature is reached.
The temperature display indicates the setted/programmed temperature on the
panel.
Attention
This wine cellar is recommended for the storage of wine bottles of 750 ml type
Bordeaux.
Temperature adjustment
You can adjust the temperature between 12 °C and 18 C.
To adjust the temperature, touch the buttons + or -. The display will show the
temperature of 18 ° C, decreasing until it reaches the selected temperature.
In order for the themperature set in the panel to be reached, the room
temperature where the product is installed should always be higher than the
programmed temperature.
°C
3
4
5
5
Lock panel indicator
4
Temperature adjustment button
5
To disable the audible alarm
To turn off the audible alarm, touch buttons
for three seconds. The alarm will sound and will then be disabled.
The control panel will continue working normally.
To activate the beep again repeat the procedure and the alarm will function
normally.
Internal light
Click on the button
: the interior light turns on and remains on the icon in
the panel.
To turn off, press the button
again.
How to lock or unlock the control panel
To lock the control panel, press the button
signal is emitted, the functions of the control panel will be blocked and
icon
will light in the display.
To unlock the panel, repeat the procedure.
Energy saving mode
To activate power saving mode, briefly press the button
the appliance emits a beep and all the lights on the screen will shut off.
To disable power saving mode, repeat the above procedure.
Use of the functions of the control panel on the energy saving
mode
The functions of the panel can be used normally when in the energy saving
mode. To do this, simply press any button. The device emits an audible alarm
and the screen will function normally. If no button is pressed after 5 seconds,
the panel lights will turn off again.
Stand-by mode
If after 3 minutes with product on, no button in the control panel is touch
product enters stand-by mode and the temperature stays on the screen
how to use electrolux 20
and
at the same time
for 3 seconds. An acoustic
for 3 seconds:
Publicidad
