DURAVIT LM 7822 L Instrucciones De Montaje Y Uso página 7

9
> Lay the bottom of the
mirror against the wall and
tighten the set screw to
secure the mirror in place.
13
> The top screw allows front
to back adjustment.
10
> Hinge has to be adjusted
to be properly secure to
the recessed frame.
14
> Check the cabinet is
leveled and securely
attached to the wall.
# LM 7822 + # LM 9877
11
N
N
G G
L
L
> Note the location of the
hardwire box on the back
of the cabinet. Provide
a cutout in the wall to
accommodate the depth
of this box as well as the
electrical conduit entering
the box. Please reference
hardwire instructions pg.
9.
NOTICE
A length of conduit must be
provided from the wall cutout
long enough to reach the
floor.
> Lift the unit up and onto
the mounting bracket.
15
> Removing the plugs on
the inside back wall of the
cabinet will reveal screws
which allow adjustment
of the unit. The top screw
will adjust front to back,
and the bottom screw
adjusts up and down.
12
> The bottom screw allows
up and down adjustment.
16
4x
> Make adjustments to
the level as needed and
reinsert the plugs.
MAL_Light and Mirror_LM 7822 L/R/19.10.3
7