Hilti Nuron DSH 700-22 Manual De Instrucciones Original página 35

3.6.2 Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it down for longer than three
seconds. The system does not detect a potential malfunction of the battery due to misuse, for example
battery dropped or pierced, external heat damage, etc.
Status
All LEDs show in sequence, followed by one (1)
LED showing constantly green.
All LEDs show in sequence, followed by one (1)
LED quick-flashing yellow.
All LEDs show in sequence, followed by one (1)
LED showing constantly red.
3.7 Items supplied
Cordless cut-off saw, D60 flange for diamond cut-off wheels, arbor locking pin, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Product properties
Weight in accordance with EPTA Procedure 01,
without battery
Max. wheel diameter
Max. cutting depth
Tightening torque (securing screw)
Max. speed (drive spindle)
Max. permissible water pressure
Arbor hole, cut-off wheel / diameter of centering
collar of centering bushing (reversible)
Storage temperature
Ambient temperature for operation
4.2 Cut-off wheels
Min. flange outside
diameter
Max. nominal wheel
thickness
Max. speed (cut-off wheel)
4.3 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
*2284136*
Abrasive cut-off wheel
Diamond cut-off wheel
Steel-core wheel
Composite wheel
2284136
Meaning
The battery can remain in use.
The check to ascertain the battery's state of health
did not complete. Repeat the procedure, or consult
Hilti Service.
If a connected product can still be used, the re-
maining battery capacity is below 50 %.
If a connected product can no longer be used, the
battery has reached the end of its useful life and
has to be replaced. Consult Hilti Service.
DSH 600-22
8.5 kg
300 mm
120 mm
20 Nm ... 30 Nm
5,080 /min
6 bar
20 mm or 25.4 mm
−20 ℃ ... 40 ℃
−17 ℃ ... 50 ℃
DSH 600-22
78 mm
60 mm
4 mm
4.5 mm
5,080 /min (≙ 79.8 m/s)
21.6 V
See the end of these operating
instructions
−17 ℃ ... 60 ℃
DSH 700-22
8.8 kg
300 mm
120 mm
20 Nm ... 30 Nm
5,080 /min
6 bar
20 mm or 25.4 mm
−20 ℃ ... 40 ℃
−17 ℃ ... 50 ℃
DSH 700-22
78 mm
60 mm
4 mm
4.5 mm
5,080 /min (≙ 79.8 m/s)
English 29