Function Selection; Commission Rate Programming; Commission Rate - Sharp XE-A41S Manual De Instrucciones

To delete a PLU/UPC code, use the following sequence:

Function selection

*: Item:
A Commission group number
B PLU/sub-department selection
(For PLU code only)
When programming UPC codes, always enter 1 for B.
Key operation example
When you program all 7000 PLU/UPC codes, the programming sequence will be complete with a
press of the

Commission Rate Programming

3
Based on each clerk's sales total of each commission group and the corresponding commission rate, the
commission amounts are calculated, which is printed on clerk reports.

Commission rate

s 28
Key operation example
You must use a decimal point when setting a fractional rate.
p
PLU/UPC code
p
PLU/UPC code
p
1
s A
10
s
key.
@
Commission
number (1 or 2)
s @
28
@
1
s A
15
v
To delete the following
PLU/UPC
To delete another PLU/UPC
To program "00"
*
AB
To program the following PLU/UPC
To program another PLU/UPC
Selection:
Sub-department
PLU*
@
Commission rate
A
s A
Entry:
0-2 (0: Non commission)(default:0)
0
1
Print
PLU/sub-dept. selection
Commission group
number
s A
(0.00 - 999.99)
Print
39