JBM 54299 Manual De Instrucciones página 5

REF. 54299
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This complete kit helps you extract and install wheel hub and
wheel bearings.
Includes pressure plates with many sizes, which allows you to
work with wheel bearings of different diameters.
Also, its centering bracket ensures that the pressure bolt gets
placed in the correct position.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before using
the product.
Failure to comply with these instructions could
result in personal injury and/or damage
to the product.
Please keep the instructions for future reference.
TECHNICAL SPECIFICATIONS
Pressure adapters (inner diameter): 89, 99, 120mm
Support plate (outer diameter): 95mm
Pressure plates (outer diameter): 53, 585, 65, 66, 68, 71, 73, 78,
83mm
Sleeve adapters (inner/outer diameter): 86/109, 82/10,
71/945mm
Spacer ring (inner/outer diameter): 86/955mm
Bolt size: 24x280mm
Bolt thread: 7/8"- 9 UNF
Weight: 14,58kg
PARTS LIST
Item Description
A Bolt
B Bearing
C Centering bracket
D Pressure adapter
E Pressure adapter
F Pressure adapter
G Nut
H Support Plate
I Pressure plate
J Pressure plate
K Pressure plate
L Pressure plate
M Pressure plate
N Pressure plate
O Pressure plate
P Pressure plate
Q Pressure plate
R Sleeve adapter
S Sleeve adapter
T Sleeve adapter
U Spacer Ring
OPERATION
Wheel hub removal
Raise the vehicle.
Remove the wheel, the brake calliper, the tie rod and the axle
retaining nut.
Take off the axle from the bearing housing.
Select the pressure adapter that best fits your bearing hou-
sing.
5