The safety-, workplace- and maintenance specifications of the manufacturer as well as the
dimensions specified in the technical data must be observed.
Please note that our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent purposes.
Remaining hazards
The machine has been built using modern technology and in accordance with recognized
safety rules. Some hazards, however, may still remain.
• Electrical hazards exist when unsuitable electric connections are used.
• Although having regarded all considerable rules there may still remain not obvious remain-
ing hazards.
• Minimize remaining hazards by following the instructions in "Safety Rules", "Use only as
authorized" and in the entire operating manual.
7. Technical data
Input voltage
Mains frequency
Nominal power
Charging voltage
Charging current
Operating temperature
Protection class
Mass
8. Use
m CAUTION!
• Never charge batteries below 0 °C or above 40 °C.
• Do not charge batteries in environments with high humidity or high temperatures.
• Do not cover the battery or the charger during charging.
Charging
m CAUTION!
Insert original batteries only into the charger.
NOTE
During charging, the battery and the charger will heat up. That is normal.
www.scheppach.com
220-240 V~
50-60 Hz
65 W
20,5 V
2,4 A
0 - 40 °C
II
0,35 kg
GB | 21