Philips SRP4419V/27 Manual De Usuario página 6

Programming Your Remote
Your remote is designed to control multiple audio/
video devices. To use, you will need to program the
remote for your devices. There are two different
methods you can use to program the remote, Direct
Code Entry or Auto Code Search.
• The Direct Code Entry method is the
recommended method, as it is the simplest and
quickest method in most cases.
• The Auto Code Search method searches
through all the codes in the remote to find a
code for your device.
NOTE: This remote comes preprogrammed for
Roku boxes and Samsung TVs. Press TV, B-RAY
®
and AUD for corresponding Vizio devices, and
STRM for Roku boxes.
Direct Code Entry (Recommended)
Locate the Code List included
1.
with your remote. Find the section
for the type of device you wish
to control, (e.g., TV, STRM, DVD,
AUD, CBL, AUX). Locate the brand
of your device and circle all the
remote codes for the brand.
2. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns
on. Release the SETUP button.
The red light will remain on.
NOTE: The red light will either be a
small light at the top of the remote
or the power ON/OFF button.
3. Press and release the device
button on the remote for the type
of device you wish to control,
(e.g., TV, B-RAY, STRM, AUD).
The red light will blink once and
remain on.
NOTE: Any of the device buttons
on the remote can be programmed
to control any of your devices. For
example, you can use the AUD
device button on the remote to
control a satellite receiver, digital
6