Bimar MP1000M Manual De Instrucciones página 38

• Before each use, check that the battery charger (including the electric cord) and the
scooter are in good condition and are not damaged: in case of doubt, contact
professionally qualified personnel.
• Make sure that the cable is correctly positioned and that it is not in contact with hot
parts or sharp edges, wrapped around the unit or twisted around itself.
• The scooter must be placed on a surface that is stable, wide (shelves are excluded),
and not sloping.
Charging your electric scooter
1. The scooter must be switched off during charging (display off); if it was
previously on, press the button for about a second to turn the scooter off.
2. Check that the scooter's charging port is clean and dry.
3. Insert the pin of the supplied adapter into the port at the bottom of the deck
(near the kick stand) all the way down, and insert the plug into the socket,
making sure the red light on the charger is on. When the light on the battery
charger turns to green (a charge usually takes about 3h), this indicates that the
battery is fully charged. You may now stop charging and remove the plug from
the power socket. Do not leave the scooter charging for longer than it takes to
fully charge.
Description