Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
33973
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
FEATURES
- Power: 60W
- Speed: 3 niveles
- Fixed or oscillating position
- Security grille
- Diameter of the blades: 40cm
- Heights: min.100 - max.120cm
PARTS OF THE FAN
1. Screw xing the base
2. Washer for the xing screw of the base
3. Separator
4. Base
5. Support tube
6. Joint screw
7. Adjusting screw
8. Fixing nut
9. Fixing nut
10. Control switch
11. Oscillation control
12. Motor
13. Motor shaft
14. Rear protection grille
15. Four screws of the rear protection grid
16. Helix
17. Fixing screw to x the propeller to the motor shaft
18. Front protection grille
19. Screw and nut to join the front grille to the rear grille
20. Grid xing clips
ASSEMBLY INSTRUCTIONS FOR THE BASE AND THE BODY
1. Remove all packaging carefully, avoid scratching the plastic covers with scissors or knives.
3. Insert the rear grille into the front of the motor shaft. Make sure the center holes are tight on the shaft.
4. Secure the rear grille using the 4 screws.
5. Insert the propeller
6. Fix the helix with the screw
7. Cover the front grille, adjusting it to the lace
8. Tighten the security screw with a screwdriver
9. Assemble the base as shown in the diagram above, xing it with the screw below the base.
9
Publicidad
