Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Control Panel
When you connect the appliance to power, Child Lock indicator will be on. Touch and hold the
Child Lock sensor until the indicator is off. Now you can use the appliance.
No objects should be placed on the sensors (this could cause an error). Touch
sensors should be always kept clean.
Switch on the appliance
When the appliance is switched off then all the cooking zones are disconnected and the in-
dicators are off.
Touch the on/off sensor field
displays for 10 seconds. Now the desired heat setting can be set using the (+) and (-) touch
sensors. (See Set the heating power).
If none of the sensors is touched within 10 seconds, the appliance switches itself off.
If child lock function is activated, the appliance cannot be switched on (see Release the
child lock)
Switch on the cooking zone
After switching on the appliance using the on/off sensor field
ated as follows:
1.
Touch (+) or (-) to select a desired cooking zone. Sensor field layout reflects the layout
of individual cooking zones.
2.
Then touch(+) or (-) to set a desired heat setting.
3.
Touch (+) or (-) of a desired cooking zone and adjust heat setting as needed.
If none of the sensors is touched within 10 seconds of switching on the appliance, the
cooking zone switches off.
to switch on the appliance. "0" will appear on all cooking zone
cooking zones can be oper-
37
Publicidad
