Descargar Imprimir esta página

IRUDEK TRIP1 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
READ THE INSTRUCTIONS FOR USE CAREFULLY BEFORE USING THE TRIPOD.
The IRUDEK TRIP1 TRIPOD is classified as PPE (Personal Protective Equipment) in
accordance with EU Regulation 2016/425 on PPE and is in conformity with European
Standard EN 795:2012 B.
The declaration of conformity is available on the following website:
http://www.irudek.com
DESCRIPTION
The tripod is a portable anchorage point for connection to a fall arrest system ( EN
363 ).
APPLICATION
The tripod is designed to protect people working in confined spaces and can also be
used for rescue, evacuation, confined space entry/exit operations, ascent and
descent of materials...
FEATURES
Working height : adjustable 115-215 cm
Weight : 13 kg
Non-slip bases
Base strap for legs
Load capacity : 500 kg
Static strength of anchorage point : 12 kN
Inner distance between bases : 1.5 m
-HOLDING: 1 pulley and 2 anchorage rings for connection to EN 363 fall arrest
systems.
-ADJUSTABLE LEGS: The telescopic construction of the legs allows the height of the
tripod to be adjusted. The legs are adjusted using the pins on each leg.
-STRAP: The base strap is necessary to maintain the position of the tripod legs and to
distribute the loads applied during the use of the device.
WARNING : The strap may cause a person near the tripod to trip.
-BAG : The carrying bag is made of nylon and is designed to protect the tripod during
transportation and storage.
TRIPOD INSTALLATION AND ADJUSTMENT
CAUTION : Do not open the confined space access cover before completing the
installation of the tripod and system components.
- Place the tripod in a vertical position with the bases facing downwards.
- Position the leg bases around the work area depending on the type of work and
surface.
- Raise the tripod. Remove the leg pin from the leg, adjust to the desired height and
replace the pin. Repeat the procedure with the rest of the legs, one by one.
- Check that the system is stable and that the tripod head is level.
- Pass the base strap through the bottom of the legs and tighten it.

Publicidad

loading

Productos relacionados para IRUDEK TRIP1