Publicidad
Idiomas disponibles
Idiomas disponibles
LC DISPLAY
5
The 2-line LC display with background illumination shows the currently active operating mode (main display), the menu options in
theoptions menu, and the numerical values or operating status for certain menu options. If there is no control signal at the DMX input, the
numbers will flash on the display; they will stop flashing as soon as a control signal is present (DMX and Slave mode).
6
CONTROL KEYS
MODE: Press MODE to access the options menu. Similarly, pressing MODE will take you one level higher in the menu structure to the main
display (press several times where necessary) when in the options menu and submenus.
ENTER: In the options menu, press ENTER to access the menu level where you can change values. You can also confirm value adjustments
by pressing ENTER.
UP and DOWN: Select the individual menu items in the options menu (device settings, operating mode, etc.) and submenus, and change the
value of a menu item, e.g. the DMX address.
INSTANT FOG: Press and hold the MODE and UP buttons at the same time in order to manually start the maximum fog discharge. To stop
the fog discharge, release the buttons.
7
FOG OUTPUT NOZZLE
The fog output nozzle is located on the front side of the fog machine. Caution, hot! When setting up the fog machine, follow the information
under "CAUTION! IMPORTANT INFORMATION ON FOG MACHINES!" in the safety instructions.
CANISTER COMPARTMENT AND SPECIAL COVER FOR CANISTER
10
8
8
CANISTER COMPARTMENT
Canister compartment for a 5l canister of Cameo fog fluid.
SEALING CAP FOR FLUID HOSE
9
Remove the sealing cap from the fluid hose in order to connect the hose to the special canister cover. When the fluid hose is not connected
to the fluid hose, close it using the sealing cap.
6
10
11
12
9
13
Publicidad
