Publicidad
Enlaces rápidos
U P
C
®
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
NSF-61
ICC/ANSI A117.1
Model/Modelo/Modèle
35930
Dryden™ Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
you may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
for easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER toDAs las instrucciones completamente
antes de empezar.
• LEER toDos los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE toUtEs les instructions avant de
débuter;
• LIRE toUs les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
®
US. Pat. 3,645,493, 3,786,995, 4,523,604, 4,562,960, 4,593,430, 4,218,785, 4,577,653, 4,765,365
tWo hANDLE WIDEsPREAD
LAvAtoRy fAUCEts
LLAvEs DE LAvAMANos
EXtENDIDAs DE Dos MANIJAs
RobINEts à ENtRAXE LoNG à
DEUX PoIGNÉEs PoUR LAvAbo
L
1
L
?
8/22/08
Rev. B
Publicidad
Manuales relacionados para Delta Dryden 35930
Resumen de contenidos para Delta Dryden 35930
- Página 1 • To READ ALL warnings, care, and maintenance information. • To purchase the correct water supply hook-up. Para instalación fácil de su llave Delta usted necesitará: • LEER toDAs las instrucciones completamente antes de empezar. • LEER toDos los avisos, cuidados, e información de mantenimiento.
- Página 2 Slide hot (1) and cold (2) end valves with gaskets (3) through sink. Install spout (1) and gasket (2). Secure with washer and nut (3). Note proper end valve installation. Longer copper tubes (4) install Note: If sink is uneven, use silicone under the gasket. away from spout;...
- Página 3 Pop-Up Installation Remove flange (1) and rubber washer (2) from Unscrew the nut (1) from the pop-up body. Place one end of spring clip (1) on end of Note: retain the seal (2) on the horizontal pop-up body. horizontal rod (2). Insert rod through hole in rod (3).
- Página 4 1/2" (13 mm) IPS Remove aerator (1) using supplied wrench (2) and turn Make Connections to water lines: faucet handles (3) to the full on position. Turn on hot and cold water supplies (4) and flush water lines for one minute. Choose hook-ups for 1/2"...
- Página 5 RP54095s Lift Rod Assembly Barra de Alzar RP49285s Tige de Manoeuvre Handle Assembly Ensamble de la Manija Poignée RP25620 Set Screw Tornillo de Ajuste Vis de Calage RP52216 Aerator RP41896 Aireador Glide Ring Aérateur Aro para Deslizar L’anneau de Glissement RP46858 RP6060 Wrench...
- Página 6 & repair. OF MERCHANTABILITY. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves This warranty excludes all industrial, commercial & business usage, whose purchasers are defective in material and/or workmanship under normal installation, use & service. Replacement hereby extended a five year limited warranty from the date of purchase, with all other terms of parts may be obtained by calling 1-800-345-DELTA (in the U.S.