Publicidad
2⅜"
1⅜"
4½"
This unit meets or exceeds
the following:
• ASME A112.18.1
• CSA B125.1
• Section 116875 of the California
Health & Safety Code
• Listed by IAPMO for use in the US
and Canada
2
10⅜"
⅜"
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
Hole size in mounting surface
Max. depth of mounting surface
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recom-
mends that this unit be installed by a
licensed, professional plumber.
• Please read over these instructions
thoroughly before beginning instal-
lation. Make sure that you have all
tools and supplies needed to com-
plete the installation.
• Protection against backflow is
provided by two check valves
in the sprayhead.
• Keep this booklet and the receipt
(or other proof of date and place of
purchase) for this product in a safe
place. The receipt is required should
it be necessary to request warranty
parts.
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
2.2 GPM
1½"
2⅜"
Publicidad
