Sensica Sensilift ST050 Manual Del Usuario página 11

User interface description
1. ON/OFF and energy selection button – Simply touch the
button (after the device is connected to the power supply) to
turn the device ON at energy level 1, shown by 1 illuminated
light in the energy level display. Once it reaches the highest
level, another gentle touch will turn the device OFF. The
device will switch to standby mode when left unattended for
45 seconds.
2. Status indicators
Status indicator
RF energy level
selection touch
button
Blinking yellow
light
Steady green light
Blinking
alternating green
and yellow lights
1-3 energy levels
lights
The device is in standby mode.
In case of no light, make sure
the power cord is plugged-in
properly.
The device is in treatment
mode. RF is activated, skin
contact is detected, and the
treatment is undergoing.
The device is in error mode.
A malfunction has occurred and
prevents the delivery of the RF.
When the green light is
on, it indicates that the RF
energy is active. Touch the RF
energy level selection button
repeatedly until you reach the
desired level: 1, 2, 3 or off.
11